TPress
1.
Volkmar, R.; Dosen, S.; Gonzalez-Vargas, J.; Baum, M.; Markovic, M.
Improving bimanual interaction with a prosthesis using semi-autonomous control Artikel
In: J. NeuroEng. Rehabil., Bd. 16, Nr. 1, 2019, ISSN: 1743-0003.
Abstract | Links | Schlagwörter: adult, analytical equipment, article, bimanual interaction, controlled study, female, hand prosthesis, human, human experiment, inertial sensor, limb movement, male, motor control, motor performance, outcome assessment, priority journal, prosthesis, prosthesis design, semi autonomous control, sensor, task performance, vibrotactor, workload
@article{Volkmar2019,
title = {Improving bimanual interaction with a prosthesis using semi-autonomous control},
author = {R. Volkmar and S. Dosen and J. Gonzalez-Vargas and M. Baum and M. Markovic},
url = {https://www.embase.com/search/results?subaction=viewrecord&id=L629849607&from=export},
doi = {10.1186/s12984-019-0617-6},
issn = {1743-0003},
year = {2019},
date = {2019-01-01},
journal = {J. NeuroEng. Rehabil.},
volume = {16},
number = {1},
address = {M. Markovic, Department of Trauma Surgery Orthopedics and Plastic Surgery, University Medical Center Göttingen, Von-Siebold-Str. 3, Göttingen, Germany},
abstract = {Background: The loss of a hand is a traumatic experience that substantially compromises an individual's capability to interact with his environment. The myoelectric prostheses are state-of-the-art (SoA) functional replacements for the lost limbs. Their overall mechanical design and dexterity have improved over the last few decades, but the users have not been able to fully exploit these advances because of the lack of effective and intuitive control. Bimanual tasks are particularly challenging for an amputee since prosthesis control needs to be coordinated with the movement of the sound limb. So far, the bimanual activities have been often neglected by the prosthetic research community. Methods: We present a novel method to prosthesis control, which uses a semi-autonomous approach in order to simplify bimanual interactions. The approach supplements the commercial SoA two-channel myoelectric control with two additional sensors. Two inertial measurement units were attached to the prosthesis and the sound hand to detect the movement of both limbs. Once a bimanual interaction is detected, the system mimics the coordination strategies of able-bodied subjects to automatically adjust the prosthesis wrist rotation (pronation, supination) and grip type (lateral, palmar) to assist the sound hand during a bimanual task. The system has been evaluated in eight able-bodied subjects performing functional uni- A nd bi-manual tasks using the novel method and SoA two-channel myocontrol. The outcome measures were time to accomplish the task, semi-autonomous system misclassification rate, subjective rating of intuitiveness, and perceived workload (NASA TLX). Results: The results demonstrated that the novel control interface substantially outperformed the SoA myoelectric control. While using the semi-autonomous control the time to accomplish the task and the perceived workload decreased for 25 and 27%, respectively, while the subjects rated the system as more intuitive then SoA myocontrol. Conclusions: The novel system uses minimal additional hardware (two inertial sensors) and simple processing and it is therefore convenient for practical implementation. By using the proposed control scheme, the prosthesis assists the user's sound hand in performing bimanual interactions while decreasing cognitive burden.},
keywords = {adult, analytical equipment, article, bimanual interaction, controlled study, female, hand prosthesis, human, human experiment, inertial sensor, limb movement, male, motor control, motor performance, outcome assessment, priority journal, prosthesis, prosthesis design, semi autonomous control, sensor, task performance, vibrotactor, workload},
pubstate = {published},
tppubtype = {article}
}
Background: The loss of a hand is a traumatic experience that substantially compromises an individual's capability to interact with his environment. The myoelectric prostheses are state-of-the-art (SoA) functional replacements for the lost limbs. Their overall mechanical design and dexterity have improved over the last few decades, but the users have not been able to fully exploit these advances because of the lack of effective and intuitive control. Bimanual tasks are particularly challenging for an amputee since prosthesis control needs to be coordinated with the movement of the sound limb. So far, the bimanual activities have been often neglected by the prosthetic research community. Methods: We present a novel method to prosthesis control, which uses a semi-autonomous approach in order to simplify bimanual interactions. The approach supplements the commercial SoA two-channel myoelectric control with two additional sensors. Two inertial measurement units were attached to the prosthesis and the sound hand to detect the movement of both limbs. Once a bimanual interaction is detected, the system mimics the coordination strategies of able-bodied subjects to automatically adjust the prosthesis wrist rotation (pronation, supination) and grip type (lateral, palmar) to assist the sound hand during a bimanual task. The system has been evaluated in eight able-bodied subjects performing functional uni- A nd bi-manual tasks using the novel method and SoA two-channel myocontrol. The outcome measures were time to accomplish the task, semi-autonomous system misclassification rate, subjective rating of intuitiveness, and perceived workload (NASA TLX). Results: The results demonstrated that the novel control interface substantially outperformed the SoA myoelectric control. While using the semi-autonomous control the time to accomplish the task and the perceived workload decreased for 25 and 27%, respectively, while the subjects rated the system as more intuitive then SoA myocontrol. Conclusions: The novel system uses minimal additional hardware (two inertial sensors) and simple processing and it is therefore convenient for practical implementation. By using the proposed control scheme, the prosthesis assists the user's sound hand in performing bimanual interactions while decreasing cognitive burden.
2.
Webster, J. B.
Lower Limb Amputation Care Across the Active Duty Military and Veteran Populations Artikel
In: Phys. Med. Rehabil. Clin. North Am., Bd. 30, Nr. 1, S. 89–109, 2019, ISSN: 1047-9651.
Abstract | Links | Schlagwörter: analgesia, body weight gain, bone density, cardiovascular disease, clinical outcome, cumulative trauma disorder, health care management, human, injury, intermethod comparison, leg amputation, leg injury, limb prosthesis, limb salvage, long term care, low back pain, lower leg prosthesis, mental health, military personnel, obesity, osteoarthritis, osteopenia, patient care, physiotherapy, priority journal, Pro-Flex, prosthetic fitting, range of motion, rehabilitation care, review, skin irritation, traumatic amputation, traumatic brain injury, veteran, wound closure
@article{Webster2019,
title = {Lower Limb Amputation Care Across the Active Duty Military and Veteran Populations},
author = {J. B. Webster},
url = {https://www.embase.com/search/results?subaction=viewrecord&id=L2001229794&from=export},
doi = {10.1016/j.pmr.2018.08.008},
issn = {1047-9651},
year = {2019},
date = {2019-01-01},
journal = {Phys. Med. Rehabil. Clin. North Am.},
volume = {30},
number = {1},
pages = {89–109},
abstract = {Traumatic amputation can result from injuries sustained both within and outside the military setting. Individuals with trauma-related amputations have unique needs and require specialized management with an interdisciplinary team approach and care coordination across the continuum of care to facilitate optimal outcomes. Management considerations include issues with the amputation itself, issues related to injury of other body parts, and the management of longer-term secondary conditions. Some of these issues are more prevalent and of greater severity in the early recovery period, whereas others develop later and have the potential for progressive worsening over time.},
keywords = {analgesia, body weight gain, bone density, cardiovascular disease, clinical outcome, cumulative trauma disorder, health care management, human, injury, intermethod comparison, leg amputation, leg injury, limb prosthesis, limb salvage, long term care, low back pain, lower leg prosthesis, mental health, military personnel, obesity, osteoarthritis, osteopenia, patient care, physiotherapy, priority journal, Pro-Flex, prosthetic fitting, range of motion, rehabilitation care, review, skin irritation, traumatic amputation, traumatic brain injury, veteran, wound closure},
pubstate = {published},
tppubtype = {article}
}
Traumatic amputation can result from injuries sustained both within and outside the military setting. Individuals with trauma-related amputations have unique needs and require specialized management with an interdisciplinary team approach and care coordination across the continuum of care to facilitate optimal outcomes. Management considerations include issues with the amputation itself, issues related to injury of other body parts, and the management of longer-term secondary conditions. Some of these issues are more prevalent and of greater severity in the early recovery period, whereas others develop later and have the potential for progressive worsening over time.
3.
Houdijk, H.; Wezenberg, D.; Hak, L.; Cutti, A. G.
In: J. NeuroEng. Rehabil., Bd. 15, 2018, ISSN: 1743-0003.
Abstract | Links | Schlagwörter: adult, article, biomechanics, controlled study, energy storing and return prosthetic feet, gait, human, kinematics, leg amputation, leg prosthesis, male, mobilization, priority journal, solid ankle cushioned heel feet, step length, walking speed
@article{Houdijk2018,
title = {Energy storing and return prosthetic feet improve step length symmetry while preserving margins of stability in persons with transtibial amputation},
author = {H. Houdijk and D. Wezenberg and L. Hak and A. G. Cutti},
url = {https://www.embase.com/search/results?subaction=viewrecord&id=L623754871&from=export},
doi = {10.1186/s12984-018-0404-9},
issn = {1743-0003},
year = {2018},
date = {2018-01-01},
journal = {J. NeuroEng. Rehabil.},
volume = {15},
address = {H. Houdijk, Department of Human Movement Sciences, Faculty of Behavioral and Movement Sciences, Vrije Universiteit Amsterdam, Van der Boechorststraat 9, Amsterdam, Netherlands},
abstract = {Background: Energy storing and return (ESAR) feet are generally preferred over solid ankle cushioned heel (SACH) feet by people with a lower limb amputation. While ESAR feet have been shown to have only limited effect on gait economy, other functional benefits should account for this preference. A simple biomechanical model suggests that enhanced gait stability and gait symmetry could prove to explain part of the difference in the subjective preference between both feet. Aim: To investigate whether increased push-off power with ESAR feet increases center of mass velocity at push off and enhance intact step length and step length symmetry while preserving the margin of stability during walking in people with a transtibial prosthesis. Methods: Fifteen people with a unilateral transtibial amputation walked with their prescribed ESAR foot and a SACH foot at a fixed walking speed (1.2 m/s) over a level walkway while kinematic and kinetic data were collected. Push-off work generated by the foot, center of mass velocity, step length, step length symmetry and backward margin of stability were assessed and compared between feet. Results: Push-off work was significantly higher when using the ESAR foot compared to the SACH foot. Simultaneously, center of mass velocity at toe-off was higher with ESAR compared to SACH, and intact step length and step length symmetry increased without reducing the backward margin of stability. Conclusion: Compared to the SACH foot, the ESAR foot allowed an improvement of step length symmetry while preserving the backward margin of stability at community ambulation speed. These benefits may possibly contribute to the subjective preference for ESAR feet in people with a lower limb amputation.},
keywords = {adult, article, biomechanics, controlled study, energy storing and return prosthetic feet, gait, human, kinematics, leg amputation, leg prosthesis, male, mobilization, priority journal, solid ankle cushioned heel feet, step length, walking speed},
pubstate = {published},
tppubtype = {article}
}
Background: Energy storing and return (ESAR) feet are generally preferred over solid ankle cushioned heel (SACH) feet by people with a lower limb amputation. While ESAR feet have been shown to have only limited effect on gait economy, other functional benefits should account for this preference. A simple biomechanical model suggests that enhanced gait stability and gait symmetry could prove to explain part of the difference in the subjective preference between both feet. Aim: To investigate whether increased push-off power with ESAR feet increases center of mass velocity at push off and enhance intact step length and step length symmetry while preserving the margin of stability during walking in people with a transtibial prosthesis. Methods: Fifteen people with a unilateral transtibial amputation walked with their prescribed ESAR foot and a SACH foot at a fixed walking speed (1.2 m/s) over a level walkway while kinematic and kinetic data were collected. Push-off work generated by the foot, center of mass velocity, step length, step length symmetry and backward margin of stability were assessed and compared between feet. Results: Push-off work was significantly higher when using the ESAR foot compared to the SACH foot. Simultaneously, center of mass velocity at toe-off was higher with ESAR compared to SACH, and intact step length and step length symmetry increased without reducing the backward margin of stability. Conclusion: Compared to the SACH foot, the ESAR foot allowed an improvement of step length symmetry while preserving the backward margin of stability at community ambulation speed. These benefits may possibly contribute to the subjective preference for ESAR feet in people with a lower limb amputation.
4.
Ernst, M.; Altenburg, B.; Bellmann, M.; Schmalz, T.
In: J. NeuroEng. Rehabil., Bd. 14, Nr. 1, 2017, ISSN: 1743-0003.
Abstract | Links | Schlagwörter: adult, article, autoadaptive dorsiflexion stop, controlled study, foot prosthesis, Genium, ground reaction force, human, human experiment, informed consent, joint angle, joint torque, leg amputation, male, microprocessor, microprocessor controlled prosthetic feet, musculoskeletal function, musculoskeletal system parameters, priority journal, standing, task performance, transfemoral amputation, transtibial amputation, vertical ground reaction force
@article{Ernst2017,
title = {Standing on slopes - How current microprocessor-controlled prosthetic feet support transtibial and transfemoral amputees in an everyday task},
author = {M. Ernst and B. Altenburg and M. Bellmann and T. Schmalz},
url = {https://www.embase.com/search/results?subaction=viewrecord&id=L619264869&from=export},
doi = {10.1186/s12984-017-0322-2},
issn = {1743-0003},
year = {2017},
date = {2017-01-01},
journal = {J. NeuroEng. Rehabil.},
volume = {14},
number = {1},
address = {M. Ernst, Research Biomechanics, CRandS, Otto Bock HealthCare GmbH, Göttingen, Germany},
abstract = {Background: Conventional prosthetic feet like energy storage and return feet provide only a limited range of ankle motion compared to human ones. In order to overcome the poor rotational adaptability, prosthetic manufacturers developed different prosthetic feet with an additional rotational joint and implemented active control in different states. It was the aim of the study to investigate to what extent these commercially available microprocessor-controlled prosthetic feet support a natural posture while standing on inclines and which concept is most beneficial for lower limb amputees. Methods: Four unilateral transtibial and four unilateral transfemoral amputees participated in the study. Each of the subjects wore five different microprocessor-controlled prosthetic feet in addition to their everyday feet. The subjects were asked to stand on slopes of different inclinations (level ground, upward slope of 10°, and downward slope of -10°). Vertical ground reaction forces, joint torques and joint angles in the sagittal plane were measured for both legs separately for the different situations and compared to a non-amputee reference group. Results: Differences in the biomechanical parameters were observed between the different prosthetic feet and compared to the reference group for the investigated situations. They were most prominent while standing on a downward slope. For example, on the prosthetic side, the vertical ground reaction force is reduced by about 20%, and the torque about the knee acts to flex the joint for feet that are not capable of a full adaptation to the downward slope. In contrast, fully adaptable feet with an auto-adaptive dorsiflexion stop show no changes in vertical ground reaction forces and knee extending torques. Conclusions: A prosthetic foot that provides both, an auto-adaptive dorsiflexion stop and a sufficient range of motion for fully adapting to inclinations appears to be the key element in the prosthetic fitting for standing on inclinations in lower limb amputees. In such situations, this prosthetic concept appears superior to both, conventional feet with passive structures as well as feet that solely provide a sufficient range of motion. The results also indicate that both, transfemoral and transtibial amputees benefit from such a foot.},
keywords = {adult, article, autoadaptive dorsiflexion stop, controlled study, foot prosthesis, Genium, ground reaction force, human, human experiment, informed consent, joint angle, joint torque, leg amputation, male, microprocessor, microprocessor controlled prosthetic feet, musculoskeletal function, musculoskeletal system parameters, priority journal, standing, task performance, transfemoral amputation, transtibial amputation, vertical ground reaction force},
pubstate = {published},
tppubtype = {article}
}
Background: Conventional prosthetic feet like energy storage and return feet provide only a limited range of ankle motion compared to human ones. In order to overcome the poor rotational adaptability, prosthetic manufacturers developed different prosthetic feet with an additional rotational joint and implemented active control in different states. It was the aim of the study to investigate to what extent these commercially available microprocessor-controlled prosthetic feet support a natural posture while standing on inclines and which concept is most beneficial for lower limb amputees. Methods: Four unilateral transtibial and four unilateral transfemoral amputees participated in the study. Each of the subjects wore five different microprocessor-controlled prosthetic feet in addition to their everyday feet. The subjects were asked to stand on slopes of different inclinations (level ground, upward slope of 10°, and downward slope of -10°). Vertical ground reaction forces, joint torques and joint angles in the sagittal plane were measured for both legs separately for the different situations and compared to a non-amputee reference group. Results: Differences in the biomechanical parameters were observed between the different prosthetic feet and compared to the reference group for the investigated situations. They were most prominent while standing on a downward slope. For example, on the prosthetic side, the vertical ground reaction force is reduced by about 20%, and the torque about the knee acts to flex the joint for feet that are not capable of a full adaptation to the downward slope. In contrast, fully adaptable feet with an auto-adaptive dorsiflexion stop show no changes in vertical ground reaction forces and knee extending torques. Conclusions: A prosthetic foot that provides both, an auto-adaptive dorsiflexion stop and a sufficient range of motion for fully adapting to inclinations appears to be the key element in the prosthetic fitting for standing on inclinations in lower limb amputees. In such situations, this prosthetic concept appears superior to both, conventional feet with passive structures as well as feet that solely provide a sufficient range of motion. The results also indicate that both, transfemoral and transtibial amputees benefit from such a foot.
5.
Schweisfurth, M. A.; Markovic, M.; Dosen, S.; Teich, F.; Graimann, B.; Farina, D.
Electrotactile EMG feedback improves the control of prosthesis grasping force Artikel
In: J. Neural Eng., Bd. 13, Nr. 5, 2016, ISSN: 1741-2560.
Abstract | Links | Schlagwörter: accuracy, adult, amputee, article, case report, controlled study, electromyography, electrotactile electromyography, feedback system, female, force, grip strength, hand prosthesis, human, Michaelangelo Hand, myoelectrically controlled prosthesis, priority journal, sensory feedback, task performance, young adult
@article{Schweisfurth2016,
title = {Electrotactile EMG feedback improves the control of prosthesis grasping force},
author = {M. A. Schweisfurth and M. Markovic and S. Dosen and F. Teich and B. Graimann and D. Farina},
url = {https://www.embase.com/search/results?subaction=viewrecord&id=L612465506&from=export},
doi = {10.1088/1741-2560/13/5/056010},
issn = {1741-2560},
year = {2016},
date = {2016-01-01},
journal = {J. Neural Eng.},
volume = {13},
number = {5},
address = {D. Farina, Institute for NeuroRehabilitation Systems, University Medical Center Göttingen, Georg-August University, Göttingen, Germany},
abstract = {Objective. A drawback of active prostheses is that they detach the subject from the produced forces, thereby preventing direct mechanical feedback. This can be compensated by providing somatosensory feedback to the user through mechanical or electrical stimulation, which in turn may improve the utility, sense of embodiment, and thereby increase the acceptance rate. Approach. In this study, we compared a novel approach to closing the loop, namely EMG feedback (emgFB), to classic force feedback (forceFB), using electrotactile interface in a realistic task setup. Eleven intact-bodied subjects and one transradial amputee performed a routine grasping task while receiving emgFB or forceFB. The two feedback types were delivered through the same electrotactile interface, using a mixed spatial/frequency coding to transmit 8 discrete levels of the feedback variable. In emgFB, the stimulation transmitted the amplitude of the processed myoelectric signal generated by the subject (prosthesis input), and in forceFB the generated grasping force (prosthesis output). The task comprised 150 trials of routine grasping at six forces, randomly presented in blocks of five trials (same force). Interquartile range and changes in the absolute error (AE) distribution (magnitude and dispersion) with respect to the target level were used to assess precision and overall performance, respectively. Main results. Relative to forceFB, emgFB significantly improved the precision of myoelectric commands (min/max of the significant levels) for 23%/36% as well as the precision of force control for 12%/32%, in intact-bodied subjects. Also, the magnitude and dispersion of the AE distribution were reduced. The results were similar in the amputee, showing considerable improvements. Significance. Using emgFB, the subjects therefore decreased the uncertainty of the forward pathway. Since there is a correspondence between the EMG and force, where the former anticipates the latter, the emgFB allowed for predictive control, as the subjects used the feedback to adjust the desired force even before the prosthesis contacted the object. In conclusion, the online emgFB was superior to the classic forceFB in realistic conditions that included electrotactile stimulation, limited feedback resolution (8 levels), cognitive processing delay, and time constraints (fast grasping).},
keywords = {accuracy, adult, amputee, article, case report, controlled study, electromyography, electrotactile electromyography, feedback system, female, force, grip strength, hand prosthesis, human, Michaelangelo Hand, myoelectrically controlled prosthesis, priority journal, sensory feedback, task performance, young adult},
pubstate = {published},
tppubtype = {article}
}
Objective. A drawback of active prostheses is that they detach the subject from the produced forces, thereby preventing direct mechanical feedback. This can be compensated by providing somatosensory feedback to the user through mechanical or electrical stimulation, which in turn may improve the utility, sense of embodiment, and thereby increase the acceptance rate. Approach. In this study, we compared a novel approach to closing the loop, namely EMG feedback (emgFB), to classic force feedback (forceFB), using electrotactile interface in a realistic task setup. Eleven intact-bodied subjects and one transradial amputee performed a routine grasping task while receiving emgFB or forceFB. The two feedback types were delivered through the same electrotactile interface, using a mixed spatial/frequency coding to transmit 8 discrete levels of the feedback variable. In emgFB, the stimulation transmitted the amplitude of the processed myoelectric signal generated by the subject (prosthesis input), and in forceFB the generated grasping force (prosthesis output). The task comprised 150 trials of routine grasping at six forces, randomly presented in blocks of five trials (same force). Interquartile range and changes in the absolute error (AE) distribution (magnitude and dispersion) with respect to the target level were used to assess precision and overall performance, respectively. Main results. Relative to forceFB, emgFB significantly improved the precision of myoelectric commands (min/max of the significant levels) for 23%/36% as well as the precision of force control for 12%/32%, in intact-bodied subjects. Also, the magnitude and dispersion of the AE distribution were reduced. The results were similar in the amputee, showing considerable improvements. Significance. Using emgFB, the subjects therefore decreased the uncertainty of the forward pathway. Since there is a correspondence between the EMG and force, where the former anticipates the latter, the emgFB allowed for predictive control, as the subjects used the feedback to adjust the desired force even before the prosthesis contacted the object. In conclusion, the online emgFB was superior to the classic forceFB in realistic conditions that included electrotactile stimulation, limited feedback resolution (8 levels), cognitive processing delay, and time constraints (fast grasping).
2019
Volkmar, R.; Dosen, S.; Gonzalez-Vargas, J.; Baum, M.; Markovic, M.
Improving bimanual interaction with a prosthesis using semi-autonomous control Artikel
In: J. NeuroEng. Rehabil., Bd. 16, Nr. 1, 2019, ISSN: 1743-0003.
Abstract | Links | Schlagwörter: adult, analytical equipment, article, bimanual interaction, controlled study, female, hand prosthesis, human, human experiment, inertial sensor, limb movement, male, motor control, motor performance, outcome assessment, priority journal, prosthesis, prosthesis design, semi autonomous control, sensor, task performance, vibrotactor, workload
@article{Volkmar2019,
title = {Improving bimanual interaction with a prosthesis using semi-autonomous control},
author = {R. Volkmar and S. Dosen and J. Gonzalez-Vargas and M. Baum and M. Markovic},
url = {https://www.embase.com/search/results?subaction=viewrecord&id=L629849607&from=export},
doi = {10.1186/s12984-019-0617-6},
issn = {1743-0003},
year = {2019},
date = {2019-01-01},
journal = {J. NeuroEng. Rehabil.},
volume = {16},
number = {1},
address = {M. Markovic, Department of Trauma Surgery Orthopedics and Plastic Surgery, University Medical Center Göttingen, Von-Siebold-Str. 3, Göttingen, Germany},
abstract = {Background: The loss of a hand is a traumatic experience that substantially compromises an individual's capability to interact with his environment. The myoelectric prostheses are state-of-the-art (SoA) functional replacements for the lost limbs. Their overall mechanical design and dexterity have improved over the last few decades, but the users have not been able to fully exploit these advances because of the lack of effective and intuitive control. Bimanual tasks are particularly challenging for an amputee since prosthesis control needs to be coordinated with the movement of the sound limb. So far, the bimanual activities have been often neglected by the prosthetic research community. Methods: We present a novel method to prosthesis control, which uses a semi-autonomous approach in order to simplify bimanual interactions. The approach supplements the commercial SoA two-channel myoelectric control with two additional sensors. Two inertial measurement units were attached to the prosthesis and the sound hand to detect the movement of both limbs. Once a bimanual interaction is detected, the system mimics the coordination strategies of able-bodied subjects to automatically adjust the prosthesis wrist rotation (pronation, supination) and grip type (lateral, palmar) to assist the sound hand during a bimanual task. The system has been evaluated in eight able-bodied subjects performing functional uni- A nd bi-manual tasks using the novel method and SoA two-channel myocontrol. The outcome measures were time to accomplish the task, semi-autonomous system misclassification rate, subjective rating of intuitiveness, and perceived workload (NASA TLX). Results: The results demonstrated that the novel control interface substantially outperformed the SoA myoelectric control. While using the semi-autonomous control the time to accomplish the task and the perceived workload decreased for 25 and 27%, respectively, while the subjects rated the system as more intuitive then SoA myocontrol. Conclusions: The novel system uses minimal additional hardware (two inertial sensors) and simple processing and it is therefore convenient for practical implementation. By using the proposed control scheme, the prosthesis assists the user's sound hand in performing bimanual interactions while decreasing cognitive burden.},
keywords = {adult, analytical equipment, article, bimanual interaction, controlled study, female, hand prosthesis, human, human experiment, inertial sensor, limb movement, male, motor control, motor performance, outcome assessment, priority journal, prosthesis, prosthesis design, semi autonomous control, sensor, task performance, vibrotactor, workload},
pubstate = {published},
tppubtype = {article}
}
Background: The loss of a hand is a traumatic experience that substantially compromises an individual's capability to interact with his environment. The myoelectric prostheses are state-of-the-art (SoA) functional replacements for the lost limbs. Their overall mechanical design and dexterity have improved over the last few decades, but the users have not been able to fully exploit these advances because of the lack of effective and intuitive control. Bimanual tasks are particularly challenging for an amputee since prosthesis control needs to be coordinated with the movement of the sound limb. So far, the bimanual activities have been often neglected by the prosthetic research community. Methods: We present a novel method to prosthesis control, which uses a semi-autonomous approach in order to simplify bimanual interactions. The approach supplements the commercial SoA two-channel myoelectric control with two additional sensors. Two inertial measurement units were attached to the prosthesis and the sound hand to detect the movement of both limbs. Once a bimanual interaction is detected, the system mimics the coordination strategies of able-bodied subjects to automatically adjust the prosthesis wrist rotation (pronation, supination) and grip type (lateral, palmar) to assist the sound hand during a bimanual task. The system has been evaluated in eight able-bodied subjects performing functional uni- A nd bi-manual tasks using the novel method and SoA two-channel myocontrol. The outcome measures were time to accomplish the task, semi-autonomous system misclassification rate, subjective rating of intuitiveness, and perceived workload (NASA TLX). Results: The results demonstrated that the novel control interface substantially outperformed the SoA myoelectric control. While using the semi-autonomous control the time to accomplish the task and the perceived workload decreased for 25 and 27%, respectively, while the subjects rated the system as more intuitive then SoA myocontrol. Conclusions: The novel system uses minimal additional hardware (two inertial sensors) and simple processing and it is therefore convenient for practical implementation. By using the proposed control scheme, the prosthesis assists the user's sound hand in performing bimanual interactions while decreasing cognitive burden.
Webster, J. B.
Lower Limb Amputation Care Across the Active Duty Military and Veteran Populations Artikel
In: Phys. Med. Rehabil. Clin. North Am., Bd. 30, Nr. 1, S. 89–109, 2019, ISSN: 1047-9651.
Abstract | Links | Schlagwörter: analgesia, body weight gain, bone density, cardiovascular disease, clinical outcome, cumulative trauma disorder, health care management, human, injury, intermethod comparison, leg amputation, leg injury, limb prosthesis, limb salvage, long term care, low back pain, lower leg prosthesis, mental health, military personnel, obesity, osteoarthritis, osteopenia, patient care, physiotherapy, priority journal, Pro-Flex, prosthetic fitting, range of motion, rehabilitation care, review, skin irritation, traumatic amputation, traumatic brain injury, veteran, wound closure
@article{Webster2019,
title = {Lower Limb Amputation Care Across the Active Duty Military and Veteran Populations},
author = {J. B. Webster},
url = {https://www.embase.com/search/results?subaction=viewrecord&id=L2001229794&from=export},
doi = {10.1016/j.pmr.2018.08.008},
issn = {1047-9651},
year = {2019},
date = {2019-01-01},
journal = {Phys. Med. Rehabil. Clin. North Am.},
volume = {30},
number = {1},
pages = {89–109},
abstract = {Traumatic amputation can result from injuries sustained both within and outside the military setting. Individuals with trauma-related amputations have unique needs and require specialized management with an interdisciplinary team approach and care coordination across the continuum of care to facilitate optimal outcomes. Management considerations include issues with the amputation itself, issues related to injury of other body parts, and the management of longer-term secondary conditions. Some of these issues are more prevalent and of greater severity in the early recovery period, whereas others develop later and have the potential for progressive worsening over time.},
keywords = {analgesia, body weight gain, bone density, cardiovascular disease, clinical outcome, cumulative trauma disorder, health care management, human, injury, intermethod comparison, leg amputation, leg injury, limb prosthesis, limb salvage, long term care, low back pain, lower leg prosthesis, mental health, military personnel, obesity, osteoarthritis, osteopenia, patient care, physiotherapy, priority journal, Pro-Flex, prosthetic fitting, range of motion, rehabilitation care, review, skin irritation, traumatic amputation, traumatic brain injury, veteran, wound closure},
pubstate = {published},
tppubtype = {article}
}
Traumatic amputation can result from injuries sustained both within and outside the military setting. Individuals with trauma-related amputations have unique needs and require specialized management with an interdisciplinary team approach and care coordination across the continuum of care to facilitate optimal outcomes. Management considerations include issues with the amputation itself, issues related to injury of other body parts, and the management of longer-term secondary conditions. Some of these issues are more prevalent and of greater severity in the early recovery period, whereas others develop later and have the potential for progressive worsening over time.
2018
Houdijk, H.; Wezenberg, D.; Hak, L.; Cutti, A. G.
In: J. NeuroEng. Rehabil., Bd. 15, 2018, ISSN: 1743-0003.
Abstract | Links | Schlagwörter: adult, article, biomechanics, controlled study, energy storing and return prosthetic feet, gait, human, kinematics, leg amputation, leg prosthesis, male, mobilization, priority journal, solid ankle cushioned heel feet, step length, walking speed
@article{Houdijk2018,
title = {Energy storing and return prosthetic feet improve step length symmetry while preserving margins of stability in persons with transtibial amputation},
author = {H. Houdijk and D. Wezenberg and L. Hak and A. G. Cutti},
url = {https://www.embase.com/search/results?subaction=viewrecord&id=L623754871&from=export},
doi = {10.1186/s12984-018-0404-9},
issn = {1743-0003},
year = {2018},
date = {2018-01-01},
journal = {J. NeuroEng. Rehabil.},
volume = {15},
address = {H. Houdijk, Department of Human Movement Sciences, Faculty of Behavioral and Movement Sciences, Vrije Universiteit Amsterdam, Van der Boechorststraat 9, Amsterdam, Netherlands},
abstract = {Background: Energy storing and return (ESAR) feet are generally preferred over solid ankle cushioned heel (SACH) feet by people with a lower limb amputation. While ESAR feet have been shown to have only limited effect on gait economy, other functional benefits should account for this preference. A simple biomechanical model suggests that enhanced gait stability and gait symmetry could prove to explain part of the difference in the subjective preference between both feet. Aim: To investigate whether increased push-off power with ESAR feet increases center of mass velocity at push off and enhance intact step length and step length symmetry while preserving the margin of stability during walking in people with a transtibial prosthesis. Methods: Fifteen people with a unilateral transtibial amputation walked with their prescribed ESAR foot and a SACH foot at a fixed walking speed (1.2 m/s) over a level walkway while kinematic and kinetic data were collected. Push-off work generated by the foot, center of mass velocity, step length, step length symmetry and backward margin of stability were assessed and compared between feet. Results: Push-off work was significantly higher when using the ESAR foot compared to the SACH foot. Simultaneously, center of mass velocity at toe-off was higher with ESAR compared to SACH, and intact step length and step length symmetry increased without reducing the backward margin of stability. Conclusion: Compared to the SACH foot, the ESAR foot allowed an improvement of step length symmetry while preserving the backward margin of stability at community ambulation speed. These benefits may possibly contribute to the subjective preference for ESAR feet in people with a lower limb amputation.},
keywords = {adult, article, biomechanics, controlled study, energy storing and return prosthetic feet, gait, human, kinematics, leg amputation, leg prosthesis, male, mobilization, priority journal, solid ankle cushioned heel feet, step length, walking speed},
pubstate = {published},
tppubtype = {article}
}
Background: Energy storing and return (ESAR) feet are generally preferred over solid ankle cushioned heel (SACH) feet by people with a lower limb amputation. While ESAR feet have been shown to have only limited effect on gait economy, other functional benefits should account for this preference. A simple biomechanical model suggests that enhanced gait stability and gait symmetry could prove to explain part of the difference in the subjective preference between both feet. Aim: To investigate whether increased push-off power with ESAR feet increases center of mass velocity at push off and enhance intact step length and step length symmetry while preserving the margin of stability during walking in people with a transtibial prosthesis. Methods: Fifteen people with a unilateral transtibial amputation walked with their prescribed ESAR foot and a SACH foot at a fixed walking speed (1.2 m/s) over a level walkway while kinematic and kinetic data were collected. Push-off work generated by the foot, center of mass velocity, step length, step length symmetry and backward margin of stability were assessed and compared between feet. Results: Push-off work was significantly higher when using the ESAR foot compared to the SACH foot. Simultaneously, center of mass velocity at toe-off was higher with ESAR compared to SACH, and intact step length and step length symmetry increased without reducing the backward margin of stability. Conclusion: Compared to the SACH foot, the ESAR foot allowed an improvement of step length symmetry while preserving the backward margin of stability at community ambulation speed. These benefits may possibly contribute to the subjective preference for ESAR feet in people with a lower limb amputation.
2017
Ernst, M.; Altenburg, B.; Bellmann, M.; Schmalz, T.
In: J. NeuroEng. Rehabil., Bd. 14, Nr. 1, 2017, ISSN: 1743-0003.
Abstract | Links | Schlagwörter: adult, article, autoadaptive dorsiflexion stop, controlled study, foot prosthesis, Genium, ground reaction force, human, human experiment, informed consent, joint angle, joint torque, leg amputation, male, microprocessor, microprocessor controlled prosthetic feet, musculoskeletal function, musculoskeletal system parameters, priority journal, standing, task performance, transfemoral amputation, transtibial amputation, vertical ground reaction force
@article{Ernst2017,
title = {Standing on slopes - How current microprocessor-controlled prosthetic feet support transtibial and transfemoral amputees in an everyday task},
author = {M. Ernst and B. Altenburg and M. Bellmann and T. Schmalz},
url = {https://www.embase.com/search/results?subaction=viewrecord&id=L619264869&from=export},
doi = {10.1186/s12984-017-0322-2},
issn = {1743-0003},
year = {2017},
date = {2017-01-01},
journal = {J. NeuroEng. Rehabil.},
volume = {14},
number = {1},
address = {M. Ernst, Research Biomechanics, CRandS, Otto Bock HealthCare GmbH, Göttingen, Germany},
abstract = {Background: Conventional prosthetic feet like energy storage and return feet provide only a limited range of ankle motion compared to human ones. In order to overcome the poor rotational adaptability, prosthetic manufacturers developed different prosthetic feet with an additional rotational joint and implemented active control in different states. It was the aim of the study to investigate to what extent these commercially available microprocessor-controlled prosthetic feet support a natural posture while standing on inclines and which concept is most beneficial for lower limb amputees. Methods: Four unilateral transtibial and four unilateral transfemoral amputees participated in the study. Each of the subjects wore five different microprocessor-controlled prosthetic feet in addition to their everyday feet. The subjects were asked to stand on slopes of different inclinations (level ground, upward slope of 10°, and downward slope of -10°). Vertical ground reaction forces, joint torques and joint angles in the sagittal plane were measured for both legs separately for the different situations and compared to a non-amputee reference group. Results: Differences in the biomechanical parameters were observed between the different prosthetic feet and compared to the reference group for the investigated situations. They were most prominent while standing on a downward slope. For example, on the prosthetic side, the vertical ground reaction force is reduced by about 20%, and the torque about the knee acts to flex the joint for feet that are not capable of a full adaptation to the downward slope. In contrast, fully adaptable feet with an auto-adaptive dorsiflexion stop show no changes in vertical ground reaction forces and knee extending torques. Conclusions: A prosthetic foot that provides both, an auto-adaptive dorsiflexion stop and a sufficient range of motion for fully adapting to inclinations appears to be the key element in the prosthetic fitting for standing on inclinations in lower limb amputees. In such situations, this prosthetic concept appears superior to both, conventional feet with passive structures as well as feet that solely provide a sufficient range of motion. The results also indicate that both, transfemoral and transtibial amputees benefit from such a foot.},
keywords = {adult, article, autoadaptive dorsiflexion stop, controlled study, foot prosthesis, Genium, ground reaction force, human, human experiment, informed consent, joint angle, joint torque, leg amputation, male, microprocessor, microprocessor controlled prosthetic feet, musculoskeletal function, musculoskeletal system parameters, priority journal, standing, task performance, transfemoral amputation, transtibial amputation, vertical ground reaction force},
pubstate = {published},
tppubtype = {article}
}
Background: Conventional prosthetic feet like energy storage and return feet provide only a limited range of ankle motion compared to human ones. In order to overcome the poor rotational adaptability, prosthetic manufacturers developed different prosthetic feet with an additional rotational joint and implemented active control in different states. It was the aim of the study to investigate to what extent these commercially available microprocessor-controlled prosthetic feet support a natural posture while standing on inclines and which concept is most beneficial for lower limb amputees. Methods: Four unilateral transtibial and four unilateral transfemoral amputees participated in the study. Each of the subjects wore five different microprocessor-controlled prosthetic feet in addition to their everyday feet. The subjects were asked to stand on slopes of different inclinations (level ground, upward slope of 10°, and downward slope of -10°). Vertical ground reaction forces, joint torques and joint angles in the sagittal plane were measured for both legs separately for the different situations and compared to a non-amputee reference group. Results: Differences in the biomechanical parameters were observed between the different prosthetic feet and compared to the reference group for the investigated situations. They were most prominent while standing on a downward slope. For example, on the prosthetic side, the vertical ground reaction force is reduced by about 20%, and the torque about the knee acts to flex the joint for feet that are not capable of a full adaptation to the downward slope. In contrast, fully adaptable feet with an auto-adaptive dorsiflexion stop show no changes in vertical ground reaction forces and knee extending torques. Conclusions: A prosthetic foot that provides both, an auto-adaptive dorsiflexion stop and a sufficient range of motion for fully adapting to inclinations appears to be the key element in the prosthetic fitting for standing on inclinations in lower limb amputees. In such situations, this prosthetic concept appears superior to both, conventional feet with passive structures as well as feet that solely provide a sufficient range of motion. The results also indicate that both, transfemoral and transtibial amputees benefit from such a foot.
2016
Schweisfurth, M. A.; Markovic, M.; Dosen, S.; Teich, F.; Graimann, B.; Farina, D.
Electrotactile EMG feedback improves the control of prosthesis grasping force Artikel
In: J. Neural Eng., Bd. 13, Nr. 5, 2016, ISSN: 1741-2560.
Abstract | Links | Schlagwörter: accuracy, adult, amputee, article, case report, controlled study, electromyography, electrotactile electromyography, feedback system, female, force, grip strength, hand prosthesis, human, Michaelangelo Hand, myoelectrically controlled prosthesis, priority journal, sensory feedback, task performance, young adult
@article{Schweisfurth2016,
title = {Electrotactile EMG feedback improves the control of prosthesis grasping force},
author = {M. A. Schweisfurth and M. Markovic and S. Dosen and F. Teich and B. Graimann and D. Farina},
url = {https://www.embase.com/search/results?subaction=viewrecord&id=L612465506&from=export},
doi = {10.1088/1741-2560/13/5/056010},
issn = {1741-2560},
year = {2016},
date = {2016-01-01},
journal = {J. Neural Eng.},
volume = {13},
number = {5},
address = {D. Farina, Institute for NeuroRehabilitation Systems, University Medical Center Göttingen, Georg-August University, Göttingen, Germany},
abstract = {Objective. A drawback of active prostheses is that they detach the subject from the produced forces, thereby preventing direct mechanical feedback. This can be compensated by providing somatosensory feedback to the user through mechanical or electrical stimulation, which in turn may improve the utility, sense of embodiment, and thereby increase the acceptance rate. Approach. In this study, we compared a novel approach to closing the loop, namely EMG feedback (emgFB), to classic force feedback (forceFB), using electrotactile interface in a realistic task setup. Eleven intact-bodied subjects and one transradial amputee performed a routine grasping task while receiving emgFB or forceFB. The two feedback types were delivered through the same electrotactile interface, using a mixed spatial/frequency coding to transmit 8 discrete levels of the feedback variable. In emgFB, the stimulation transmitted the amplitude of the processed myoelectric signal generated by the subject (prosthesis input), and in forceFB the generated grasping force (prosthesis output). The task comprised 150 trials of routine grasping at six forces, randomly presented in blocks of five trials (same force). Interquartile range and changes in the absolute error (AE) distribution (magnitude and dispersion) with respect to the target level were used to assess precision and overall performance, respectively. Main results. Relative to forceFB, emgFB significantly improved the precision of myoelectric commands (min/max of the significant levels) for 23%/36% as well as the precision of force control for 12%/32%, in intact-bodied subjects. Also, the magnitude and dispersion of the AE distribution were reduced. The results were similar in the amputee, showing considerable improvements. Significance. Using emgFB, the subjects therefore decreased the uncertainty of the forward pathway. Since there is a correspondence between the EMG and force, where the former anticipates the latter, the emgFB allowed for predictive control, as the subjects used the feedback to adjust the desired force even before the prosthesis contacted the object. In conclusion, the online emgFB was superior to the classic forceFB in realistic conditions that included electrotactile stimulation, limited feedback resolution (8 levels), cognitive processing delay, and time constraints (fast grasping).},
keywords = {accuracy, adult, amputee, article, case report, controlled study, electromyography, electrotactile electromyography, feedback system, female, force, grip strength, hand prosthesis, human, Michaelangelo Hand, myoelectrically controlled prosthesis, priority journal, sensory feedback, task performance, young adult},
pubstate = {published},
tppubtype = {article}
}
Objective. A drawback of active prostheses is that they detach the subject from the produced forces, thereby preventing direct mechanical feedback. This can be compensated by providing somatosensory feedback to the user through mechanical or electrical stimulation, which in turn may improve the utility, sense of embodiment, and thereby increase the acceptance rate. Approach. In this study, we compared a novel approach to closing the loop, namely EMG feedback (emgFB), to classic force feedback (forceFB), using electrotactile interface in a realistic task setup. Eleven intact-bodied subjects and one transradial amputee performed a routine grasping task while receiving emgFB or forceFB. The two feedback types were delivered through the same electrotactile interface, using a mixed spatial/frequency coding to transmit 8 discrete levels of the feedback variable. In emgFB, the stimulation transmitted the amplitude of the processed myoelectric signal generated by the subject (prosthesis input), and in forceFB the generated grasping force (prosthesis output). The task comprised 150 trials of routine grasping at six forces, randomly presented in blocks of five trials (same force). Interquartile range and changes in the absolute error (AE) distribution (magnitude and dispersion) with respect to the target level were used to assess precision and overall performance, respectively. Main results. Relative to forceFB, emgFB significantly improved the precision of myoelectric commands (min/max of the significant levels) for 23%/36% as well as the precision of force control for 12%/32%, in intact-bodied subjects. Also, the magnitude and dispersion of the AE distribution were reduced. The results were similar in the amputee, showing considerable improvements. Significance. Using emgFB, the subjects therefore decreased the uncertainty of the forward pathway. Since there is a correspondence between the EMG and force, where the former anticipates the latter, the emgFB allowed for predictive control, as the subjects used the feedback to adjust the desired force even before the prosthesis contacted the object. In conclusion, the online emgFB was superior to the classic forceFB in realistic conditions that included electrotactile stimulation, limited feedback resolution (8 levels), cognitive processing delay, and time constraints (fast grasping).
2019
Volkmar, R.; Dosen, S.; Gonzalez-Vargas, J.; Baum, M.; Markovic, M.
Improving bimanual interaction with a prosthesis using semi-autonomous control Artikel
In: J. NeuroEng. Rehabil., Bd. 16, Nr. 1, 2019, ISSN: 1743-0003.
@article{Volkmar2019,
title = {Improving bimanual interaction with a prosthesis using semi-autonomous control},
author = {R. Volkmar and S. Dosen and J. Gonzalez-Vargas and M. Baum and M. Markovic},
url = {https://www.embase.com/search/results?subaction=viewrecord&id=L629849607&from=export},
doi = {10.1186/s12984-019-0617-6},
issn = {1743-0003},
year = {2019},
date = {2019-01-01},
journal = {J. NeuroEng. Rehabil.},
volume = {16},
number = {1},
address = {M. Markovic, Department of Trauma Surgery Orthopedics and Plastic Surgery, University Medical Center Göttingen, Von-Siebold-Str. 3, Göttingen, Germany},
abstract = {Background: The loss of a hand is a traumatic experience that substantially compromises an individual's capability to interact with his environment. The myoelectric prostheses are state-of-the-art (SoA) functional replacements for the lost limbs. Their overall mechanical design and dexterity have improved over the last few decades, but the users have not been able to fully exploit these advances because of the lack of effective and intuitive control. Bimanual tasks are particularly challenging for an amputee since prosthesis control needs to be coordinated with the movement of the sound limb. So far, the bimanual activities have been often neglected by the prosthetic research community. Methods: We present a novel method to prosthesis control, which uses a semi-autonomous approach in order to simplify bimanual interactions. The approach supplements the commercial SoA two-channel myoelectric control with two additional sensors. Two inertial measurement units were attached to the prosthesis and the sound hand to detect the movement of both limbs. Once a bimanual interaction is detected, the system mimics the coordination strategies of able-bodied subjects to automatically adjust the prosthesis wrist rotation (pronation, supination) and grip type (lateral, palmar) to assist the sound hand during a bimanual task. The system has been evaluated in eight able-bodied subjects performing functional uni- A nd bi-manual tasks using the novel method and SoA two-channel myocontrol. The outcome measures were time to accomplish the task, semi-autonomous system misclassification rate, subjective rating of intuitiveness, and perceived workload (NASA TLX). Results: The results demonstrated that the novel control interface substantially outperformed the SoA myoelectric control. While using the semi-autonomous control the time to accomplish the task and the perceived workload decreased for 25 and 27%, respectively, while the subjects rated the system as more intuitive then SoA myocontrol. Conclusions: The novel system uses minimal additional hardware (two inertial sensors) and simple processing and it is therefore convenient for practical implementation. By using the proposed control scheme, the prosthesis assists the user's sound hand in performing bimanual interactions while decreasing cognitive burden.},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
Background: The loss of a hand is a traumatic experience that substantially compromises an individual's capability to interact with his environment. The myoelectric prostheses are state-of-the-art (SoA) functional replacements for the lost limbs. Their overall mechanical design and dexterity have improved over the last few decades, but the users have not been able to fully exploit these advances because of the lack of effective and intuitive control. Bimanual tasks are particularly challenging for an amputee since prosthesis control needs to be coordinated with the movement of the sound limb. So far, the bimanual activities have been often neglected by the prosthetic research community. Methods: We present a novel method to prosthesis control, which uses a semi-autonomous approach in order to simplify bimanual interactions. The approach supplements the commercial SoA two-channel myoelectric control with two additional sensors. Two inertial measurement units were attached to the prosthesis and the sound hand to detect the movement of both limbs. Once a bimanual interaction is detected, the system mimics the coordination strategies of able-bodied subjects to automatically adjust the prosthesis wrist rotation (pronation, supination) and grip type (lateral, palmar) to assist the sound hand during a bimanual task. The system has been evaluated in eight able-bodied subjects performing functional uni- A nd bi-manual tasks using the novel method and SoA two-channel myocontrol. The outcome measures were time to accomplish the task, semi-autonomous system misclassification rate, subjective rating of intuitiveness, and perceived workload (NASA TLX). Results: The results demonstrated that the novel control interface substantially outperformed the SoA myoelectric control. While using the semi-autonomous control the time to accomplish the task and the perceived workload decreased for 25 and 27%, respectively, while the subjects rated the system as more intuitive then SoA myocontrol. Conclusions: The novel system uses minimal additional hardware (two inertial sensors) and simple processing and it is therefore convenient for practical implementation. By using the proposed control scheme, the prosthesis assists the user's sound hand in performing bimanual interactions while decreasing cognitive burden.
Webster, J. B.
Lower Limb Amputation Care Across the Active Duty Military and Veteran Populations Artikel
In: Phys. Med. Rehabil. Clin. North Am., Bd. 30, Nr. 1, S. 89–109, 2019, ISSN: 1047-9651.
@article{Webster2019,
title = {Lower Limb Amputation Care Across the Active Duty Military and Veteran Populations},
author = {J. B. Webster},
url = {https://www.embase.com/search/results?subaction=viewrecord&id=L2001229794&from=export},
doi = {10.1016/j.pmr.2018.08.008},
issn = {1047-9651},
year = {2019},
date = {2019-01-01},
journal = {Phys. Med. Rehabil. Clin. North Am.},
volume = {30},
number = {1},
pages = {89–109},
abstract = {Traumatic amputation can result from injuries sustained both within and outside the military setting. Individuals with trauma-related amputations have unique needs and require specialized management with an interdisciplinary team approach and care coordination across the continuum of care to facilitate optimal outcomes. Management considerations include issues with the amputation itself, issues related to injury of other body parts, and the management of longer-term secondary conditions. Some of these issues are more prevalent and of greater severity in the early recovery period, whereas others develop later and have the potential for progressive worsening over time.},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
Traumatic amputation can result from injuries sustained both within and outside the military setting. Individuals with trauma-related amputations have unique needs and require specialized management with an interdisciplinary team approach and care coordination across the continuum of care to facilitate optimal outcomes. Management considerations include issues with the amputation itself, issues related to injury of other body parts, and the management of longer-term secondary conditions. Some of these issues are more prevalent and of greater severity in the early recovery period, whereas others develop later and have the potential for progressive worsening over time.
2018
Houdijk, H.; Wezenberg, D.; Hak, L.; Cutti, A. G.
In: J. NeuroEng. Rehabil., Bd. 15, 2018, ISSN: 1743-0003.
@article{Houdijk2018,
title = {Energy storing and return prosthetic feet improve step length symmetry while preserving margins of stability in persons with transtibial amputation},
author = {H. Houdijk and D. Wezenberg and L. Hak and A. G. Cutti},
url = {https://www.embase.com/search/results?subaction=viewrecord&id=L623754871&from=export},
doi = {10.1186/s12984-018-0404-9},
issn = {1743-0003},
year = {2018},
date = {2018-01-01},
journal = {J. NeuroEng. Rehabil.},
volume = {15},
address = {H. Houdijk, Department of Human Movement Sciences, Faculty of Behavioral and Movement Sciences, Vrije Universiteit Amsterdam, Van der Boechorststraat 9, Amsterdam, Netherlands},
abstract = {Background: Energy storing and return (ESAR) feet are generally preferred over solid ankle cushioned heel (SACH) feet by people with a lower limb amputation. While ESAR feet have been shown to have only limited effect on gait economy, other functional benefits should account for this preference. A simple biomechanical model suggests that enhanced gait stability and gait symmetry could prove to explain part of the difference in the subjective preference between both feet. Aim: To investigate whether increased push-off power with ESAR feet increases center of mass velocity at push off and enhance intact step length and step length symmetry while preserving the margin of stability during walking in people with a transtibial prosthesis. Methods: Fifteen people with a unilateral transtibial amputation walked with their prescribed ESAR foot and a SACH foot at a fixed walking speed (1.2 m/s) over a level walkway while kinematic and kinetic data were collected. Push-off work generated by the foot, center of mass velocity, step length, step length symmetry and backward margin of stability were assessed and compared between feet. Results: Push-off work was significantly higher when using the ESAR foot compared to the SACH foot. Simultaneously, center of mass velocity at toe-off was higher with ESAR compared to SACH, and intact step length and step length symmetry increased without reducing the backward margin of stability. Conclusion: Compared to the SACH foot, the ESAR foot allowed an improvement of step length symmetry while preserving the backward margin of stability at community ambulation speed. These benefits may possibly contribute to the subjective preference for ESAR feet in people with a lower limb amputation.},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
Background: Energy storing and return (ESAR) feet are generally preferred over solid ankle cushioned heel (SACH) feet by people with a lower limb amputation. While ESAR feet have been shown to have only limited effect on gait economy, other functional benefits should account for this preference. A simple biomechanical model suggests that enhanced gait stability and gait symmetry could prove to explain part of the difference in the subjective preference between both feet. Aim: To investigate whether increased push-off power with ESAR feet increases center of mass velocity at push off and enhance intact step length and step length symmetry while preserving the margin of stability during walking in people with a transtibial prosthesis. Methods: Fifteen people with a unilateral transtibial amputation walked with their prescribed ESAR foot and a SACH foot at a fixed walking speed (1.2 m/s) over a level walkway while kinematic and kinetic data were collected. Push-off work generated by the foot, center of mass velocity, step length, step length symmetry and backward margin of stability were assessed and compared between feet. Results: Push-off work was significantly higher when using the ESAR foot compared to the SACH foot. Simultaneously, center of mass velocity at toe-off was higher with ESAR compared to SACH, and intact step length and step length symmetry increased without reducing the backward margin of stability. Conclusion: Compared to the SACH foot, the ESAR foot allowed an improvement of step length symmetry while preserving the backward margin of stability at community ambulation speed. These benefits may possibly contribute to the subjective preference for ESAR feet in people with a lower limb amputation.
2017
Ernst, M.; Altenburg, B.; Bellmann, M.; Schmalz, T.
In: J. NeuroEng. Rehabil., Bd. 14, Nr. 1, 2017, ISSN: 1743-0003.
@article{Ernst2017,
title = {Standing on slopes - How current microprocessor-controlled prosthetic feet support transtibial and transfemoral amputees in an everyday task},
author = {M. Ernst and B. Altenburg and M. Bellmann and T. Schmalz},
url = {https://www.embase.com/search/results?subaction=viewrecord&id=L619264869&from=export},
doi = {10.1186/s12984-017-0322-2},
issn = {1743-0003},
year = {2017},
date = {2017-01-01},
journal = {J. NeuroEng. Rehabil.},
volume = {14},
number = {1},
address = {M. Ernst, Research Biomechanics, CRandS, Otto Bock HealthCare GmbH, Göttingen, Germany},
abstract = {Background: Conventional prosthetic feet like energy storage and return feet provide only a limited range of ankle motion compared to human ones. In order to overcome the poor rotational adaptability, prosthetic manufacturers developed different prosthetic feet with an additional rotational joint and implemented active control in different states. It was the aim of the study to investigate to what extent these commercially available microprocessor-controlled prosthetic feet support a natural posture while standing on inclines and which concept is most beneficial for lower limb amputees. Methods: Four unilateral transtibial and four unilateral transfemoral amputees participated in the study. Each of the subjects wore five different microprocessor-controlled prosthetic feet in addition to their everyday feet. The subjects were asked to stand on slopes of different inclinations (level ground, upward slope of 10°, and downward slope of -10°). Vertical ground reaction forces, joint torques and joint angles in the sagittal plane were measured for both legs separately for the different situations and compared to a non-amputee reference group. Results: Differences in the biomechanical parameters were observed between the different prosthetic feet and compared to the reference group for the investigated situations. They were most prominent while standing on a downward slope. For example, on the prosthetic side, the vertical ground reaction force is reduced by about 20%, and the torque about the knee acts to flex the joint for feet that are not capable of a full adaptation to the downward slope. In contrast, fully adaptable feet with an auto-adaptive dorsiflexion stop show no changes in vertical ground reaction forces and knee extending torques. Conclusions: A prosthetic foot that provides both, an auto-adaptive dorsiflexion stop and a sufficient range of motion for fully adapting to inclinations appears to be the key element in the prosthetic fitting for standing on inclinations in lower limb amputees. In such situations, this prosthetic concept appears superior to both, conventional feet with passive structures as well as feet that solely provide a sufficient range of motion. The results also indicate that both, transfemoral and transtibial amputees benefit from such a foot.},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
Background: Conventional prosthetic feet like energy storage and return feet provide only a limited range of ankle motion compared to human ones. In order to overcome the poor rotational adaptability, prosthetic manufacturers developed different prosthetic feet with an additional rotational joint and implemented active control in different states. It was the aim of the study to investigate to what extent these commercially available microprocessor-controlled prosthetic feet support a natural posture while standing on inclines and which concept is most beneficial for lower limb amputees. Methods: Four unilateral transtibial and four unilateral transfemoral amputees participated in the study. Each of the subjects wore five different microprocessor-controlled prosthetic feet in addition to their everyday feet. The subjects were asked to stand on slopes of different inclinations (level ground, upward slope of 10°, and downward slope of -10°). Vertical ground reaction forces, joint torques and joint angles in the sagittal plane were measured for both legs separately for the different situations and compared to a non-amputee reference group. Results: Differences in the biomechanical parameters were observed between the different prosthetic feet and compared to the reference group for the investigated situations. They were most prominent while standing on a downward slope. For example, on the prosthetic side, the vertical ground reaction force is reduced by about 20%, and the torque about the knee acts to flex the joint for feet that are not capable of a full adaptation to the downward slope. In contrast, fully adaptable feet with an auto-adaptive dorsiflexion stop show no changes in vertical ground reaction forces and knee extending torques. Conclusions: A prosthetic foot that provides both, an auto-adaptive dorsiflexion stop and a sufficient range of motion for fully adapting to inclinations appears to be the key element in the prosthetic fitting for standing on inclinations in lower limb amputees. In such situations, this prosthetic concept appears superior to both, conventional feet with passive structures as well as feet that solely provide a sufficient range of motion. The results also indicate that both, transfemoral and transtibial amputees benefit from such a foot.
2016
Schweisfurth, M. A.; Markovic, M.; Dosen, S.; Teich, F.; Graimann, B.; Farina, D.
Electrotactile EMG feedback improves the control of prosthesis grasping force Artikel
In: J. Neural Eng., Bd. 13, Nr. 5, 2016, ISSN: 1741-2560.
@article{Schweisfurth2016,
title = {Electrotactile EMG feedback improves the control of prosthesis grasping force},
author = {M. A. Schweisfurth and M. Markovic and S. Dosen and F. Teich and B. Graimann and D. Farina},
url = {https://www.embase.com/search/results?subaction=viewrecord&id=L612465506&from=export},
doi = {10.1088/1741-2560/13/5/056010},
issn = {1741-2560},
year = {2016},
date = {2016-01-01},
journal = {J. Neural Eng.},
volume = {13},
number = {5},
address = {D. Farina, Institute for NeuroRehabilitation Systems, University Medical Center Göttingen, Georg-August University, Göttingen, Germany},
abstract = {Objective. A drawback of active prostheses is that they detach the subject from the produced forces, thereby preventing direct mechanical feedback. This can be compensated by providing somatosensory feedback to the user through mechanical or electrical stimulation, which in turn may improve the utility, sense of embodiment, and thereby increase the acceptance rate. Approach. In this study, we compared a novel approach to closing the loop, namely EMG feedback (emgFB), to classic force feedback (forceFB), using electrotactile interface in a realistic task setup. Eleven intact-bodied subjects and one transradial amputee performed a routine grasping task while receiving emgFB or forceFB. The two feedback types were delivered through the same electrotactile interface, using a mixed spatial/frequency coding to transmit 8 discrete levels of the feedback variable. In emgFB, the stimulation transmitted the amplitude of the processed myoelectric signal generated by the subject (prosthesis input), and in forceFB the generated grasping force (prosthesis output). The task comprised 150 trials of routine grasping at six forces, randomly presented in blocks of five trials (same force). Interquartile range and changes in the absolute error (AE) distribution (magnitude and dispersion) with respect to the target level were used to assess precision and overall performance, respectively. Main results. Relative to forceFB, emgFB significantly improved the precision of myoelectric commands (min/max of the significant levels) for 23%/36% as well as the precision of force control for 12%/32%, in intact-bodied subjects. Also, the magnitude and dispersion of the AE distribution were reduced. The results were similar in the amputee, showing considerable improvements. Significance. Using emgFB, the subjects therefore decreased the uncertainty of the forward pathway. Since there is a correspondence between the EMG and force, where the former anticipates the latter, the emgFB allowed for predictive control, as the subjects used the feedback to adjust the desired force even before the prosthesis contacted the object. In conclusion, the online emgFB was superior to the classic forceFB in realistic conditions that included electrotactile stimulation, limited feedback resolution (8 levels), cognitive processing delay, and time constraints (fast grasping).},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
Objective. A drawback of active prostheses is that they detach the subject from the produced forces, thereby preventing direct mechanical feedback. This can be compensated by providing somatosensory feedback to the user through mechanical or electrical stimulation, which in turn may improve the utility, sense of embodiment, and thereby increase the acceptance rate. Approach. In this study, we compared a novel approach to closing the loop, namely EMG feedback (emgFB), to classic force feedback (forceFB), using electrotactile interface in a realistic task setup. Eleven intact-bodied subjects and one transradial amputee performed a routine grasping task while receiving emgFB or forceFB. The two feedback types were delivered through the same electrotactile interface, using a mixed spatial/frequency coding to transmit 8 discrete levels of the feedback variable. In emgFB, the stimulation transmitted the amplitude of the processed myoelectric signal generated by the subject (prosthesis input), and in forceFB the generated grasping force (prosthesis output). The task comprised 150 trials of routine grasping at six forces, randomly presented in blocks of five trials (same force). Interquartile range and changes in the absolute error (AE) distribution (magnitude and dispersion) with respect to the target level were used to assess precision and overall performance, respectively. Main results. Relative to forceFB, emgFB significantly improved the precision of myoelectric commands (min/max of the significant levels) for 23%/36% as well as the precision of force control for 12%/32%, in intact-bodied subjects. Also, the magnitude and dispersion of the AE distribution were reduced. The results were similar in the amputee, showing considerable improvements. Significance. Using emgFB, the subjects therefore decreased the uncertainty of the forward pathway. Since there is a correspondence between the EMG and force, where the former anticipates the latter, the emgFB allowed for predictive control, as the subjects used the feedback to adjust the desired force even before the prosthesis contacted the object. In conclusion, the online emgFB was superior to the classic forceFB in realistic conditions that included electrotactile stimulation, limited feedback resolution (8 levels), cognitive processing delay, and time constraints (fast grasping).
Williams, M. R.; D'Andrea, S.; Herr, H. M.
Impact on gait biomechanics of using an active variable impedance prosthetic knee Artikel
In: J. NeuroEng. Rehabil., Bd. 13, Nr. 1, 2016, ISSN: 1743-0003.
@article{Williams2016,
title = {Impact on gait biomechanics of using an active variable impedance prosthetic knee},
author = {M. R. Williams and S. D'Andrea and H. M. Herr},
url = {https://www.embase.com/search/results?subaction=viewrecord&id=L610660431&from=export},
doi = {10.1186/s12984-016-0159-0},
issn = {1743-0003},
year = {2016},
date = {2016-01-01},
journal = {J. NeuroEng. Rehabil.},
volume = {13},
number = {1},
address = {M.R. Williams, Louis Stokes Cleveland VA Medical Center, Cleveland, OH, United States},
abstract = {Background: An above knee amputation can have a significant impact on gait, with substantial deviations in inter-leg symmetry, step length, hip exertion and upper body involvement even when using a current clinical standard of care prosthesis. These differences can produce gait that is less efficient and less comfortable, resulting in slower and shorter distance walking, particularly with long term use. Methods: A robotic variable impedance prosthetic knee (VI Knee) was tested with five individuals (N = 5) with unilateral amputation above the knee at fixed speeds both above and below their normal walking speed. Subject gait was measured as they walked along an instrumented walkway via optical motion capture and force plates in the floor. Each subject's gait while using the VI Knee was compared to that while using their standard of care knee (OttoBock C-Leg). Results: Significant differences (p < 0.05) in walking between the standard of care and variable impedance devices were seen in step length and hip range of motion symmetries, hip extension moment, knee power and torso lean angle. While using the VI Knee, several subjects demonstrated statistically significant improvements in gait, particularly in increased hip range of motion symmetry between affected and intact sides, greater prosthesis knee power and in reducing upper body involvement in the walking task by decreasing forward and affected side lean and reducing the pelvis-torso twist coupling. These changes to torso posture during gait also resulted in increased terminal stance hip flexion moment across subjects. Detriments to gait were also observed in that some subjects exhibited decreased step length symmetry while using the VI Knee compared to the C-Leg. Conclusions: The knee tested represents the potential to improve gait biomechanics and reduce upper body involvement in persons with above knee amputation compared to current standard of care devices. While using the VI Knee, subjects demonstrated statistically significant improvements in several aspects of gait though some were worsened while using the device. It is possible that these negative effects may be mitigated through longer term training and experience with the VI Knee. Given the demonstrated benefits and the potential to reduce or eliminate detriments through training, using a powered device like the VI Knee, particularly over an extended period of time, may help to improve walking performance and comfort.},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
Background: An above knee amputation can have a significant impact on gait, with substantial deviations in inter-leg symmetry, step length, hip exertion and upper body involvement even when using a current clinical standard of care prosthesis. These differences can produce gait that is less efficient and less comfortable, resulting in slower and shorter distance walking, particularly with long term use. Methods: A robotic variable impedance prosthetic knee (VI Knee) was tested with five individuals (N = 5) with unilateral amputation above the knee at fixed speeds both above and below their normal walking speed. Subject gait was measured as they walked along an instrumented walkway via optical motion capture and force plates in the floor. Each subject's gait while using the VI Knee was compared to that while using their standard of care knee (OttoBock C-Leg). Results: Significant differences (p < 0.05) in walking between the standard of care and variable impedance devices were seen in step length and hip range of motion symmetries, hip extension moment, knee power and torso lean angle. While using the VI Knee, several subjects demonstrated statistically significant improvements in gait, particularly in increased hip range of motion symmetry between affected and intact sides, greater prosthesis knee power and in reducing upper body involvement in the walking task by decreasing forward and affected side lean and reducing the pelvis-torso twist coupling. These changes to torso posture during gait also resulted in increased terminal stance hip flexion moment across subjects. Detriments to gait were also observed in that some subjects exhibited decreased step length symmetry while using the VI Knee compared to the C-Leg. Conclusions: The knee tested represents the potential to improve gait biomechanics and reduce upper body involvement in persons with above knee amputation compared to current standard of care devices. While using the VI Knee, subjects demonstrated statistically significant improvements in several aspects of gait though some were worsened while using the device. It is possible that these negative effects may be mitigated through longer term training and experience with the VI Knee. Given the demonstrated benefits and the potential to reduce or eliminate detriments through training, using a powered device like the VI Knee, particularly over an extended period of time, may help to improve walking performance and comfort.
Hahn, A.; Lang, M.; Stuckart, C.
In: Medicine, Bd. 95, Nr. 45, 2016, ISSN: 0025-7974.
@article{Hahn2016,
title = {Analysis of clinically important factors on the performance of advanced hydraulic, microprocessor-controlled exo-prosthetic knee joints based on 899 trial fittings},
author = {A. Hahn and M. Lang and C. Stuckart},
url = {https://www.embase.com/search/results?subaction=viewrecord&id=L613375887&from=export},
doi = {10.1097/md.0000000000005386},
issn = {0025-7974},
year = {2016},
date = {2016-01-01},
journal = {Medicine},
volume = {95},
number = {45},
address = {A. Hahn, Otto Bock Healthcare Products GmbH, Brehmstrasse 16, Vienna, Austria},
abstract = {The objective of this work is to evaluate whether clinically important factors may predict an individual's capability to utilize the functional benefits provided by an advanced hydraulic, microprocessor-controlled exo-prosthetic knee component. This retrospective cross-sectional cohort analysis investigated the data of above knee amputees captured during routine trial fittings. Prosthetists rated the performance indicators showing the functional benefits of the advanced maneuvering capabilities of the device. Subjects were asked to rate their perception. Simple and multiple linear and logistic regression was applied. Data from 899 subjects with demographics typical for the population were evaluated. Ability to vary gait speed, perform toileting, and ascend stairs were identified as the most sensitive performance predictors. Prior C-Leg users showed benefits during advanced maneuvering. Variables showed plausible and meaningful effects, however, could not claim predictive power. Mobility grade showed the largest effect but also failed to be predictive. Clinical parameters such as etiology, age, mobility grade, and others analyzed here do not suffice to predict individual potential. Daily walking distance may pose a threshold value and be part of a predictive instrument. Decisions based solely on single parameters such as mobility grade rating or walking distance seem to be questionable.},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
The objective of this work is to evaluate whether clinically important factors may predict an individual's capability to utilize the functional benefits provided by an advanced hydraulic, microprocessor-controlled exo-prosthetic knee component. This retrospective cross-sectional cohort analysis investigated the data of above knee amputees captured during routine trial fittings. Prosthetists rated the performance indicators showing the functional benefits of the advanced maneuvering capabilities of the device. Subjects were asked to rate their perception. Simple and multiple linear and logistic regression was applied. Data from 899 subjects with demographics typical for the population were evaluated. Ability to vary gait speed, perform toileting, and ascend stairs were identified as the most sensitive performance predictors. Prior C-Leg users showed benefits during advanced maneuvering. Variables showed plausible and meaningful effects, however, could not claim predictive power. Mobility grade showed the largest effect but also failed to be predictive. Clinical parameters such as etiology, age, mobility grade, and others analyzed here do not suffice to predict individual potential. Daily walking distance may pose a threshold value and be part of a predictive instrument. Decisions based solely on single parameters such as mobility grade rating or walking distance seem to be questionable.
2015
Dosen, S.; Markovic, M.; Somer, K.; Graimann, B.; Farina, D.
EMG Biofeedback for online predictive control of grasping force in a myoelectric prosthesis Artikel
In: J. NeuroEng. Rehabil., Bd. 12, Nr. 1, 2015, ISSN: 1743-0003.
@article{Dosen2015,
title = {EMG Biofeedback for online predictive control of grasping force in a myoelectric prosthesis},
author = {S. Dosen and M. Markovic and K. Somer and B. Graimann and D. Farina},
url = {https://www.embase.com/search/results?subaction=viewrecord&id=L605002250&from=export},
doi = {10.1186/s12984-015-0047-z},
issn = {1743-0003},
year = {2015},
date = {2015-06-01},
journal = {J. NeuroEng. Rehabil.},
volume = {12},
number = {1},
publisher = {Springer Science and Business Media LLC},
address = {D. Farina, Department of Neurorehabilitation Engineering, University Medical Center Göttingen (UMG), Georg-August University, Göttingen, Germany},
abstract = {Background: Active hand prostheses controlled using electromyography (EMG) signals have been used for decades to restore the grasping function, lost after an amputation. Although myocontrol is a simple and intuitive interface, it is also imprecise due to the stochastic nature of the EMG recorded using surface electrodes. Furthermore, the sensory feedback from the prosthesis to the user is still missing. In this study, we present a novel concept to close the loop in myoelectric prostheses. In addition to conveying the grasping force (system output), we provided to the user the online information about the system input (EMG biofeedback). Methods: As a proof-of-concept, the EMG biofeedback was transmitted in the current study using a visual interface (ideal condition). Ten able-bodied subjects and two amputees controlled a state-of-the-art myoelectric prosthesis in routine grasping and force steering tasks using EMG and force feedback (novel approach) and force feedback only (classic approach). The outcome measures were the variability of the generated forces and absolute deviation from the target levels in the routine grasping task, and the root mean square tracking error and the number of sudden drops in the force steering task. Results: During the routine grasping, the novel method when used by able-bodied subjects decreased twofold the force dispersion as well as absolute deviations from the target force levels, and also resulted in a more accurate and stable tracking of the reference force profiles during the force steering. Furthermore, the force variability during routine grasping did not increase for the higher target forces with EMG biofeedback. The trend was similar in the two amputees. Conclusions: The study demonstrated that the subjects, including the two experienced users of a myoelectric prosthesis, were able to exploit the online EMG biofeedback to observe and modulate the myoelectric signals, generating thereby more consistent commands. This allowed them to control the force predictively (routine grasping) and with a finer resolution (force steering). The future step will be to implement this promising and simple approach using an electrotactile interface. A prosthesis with a reliable response, following faithfully user intentions, would improve the utility during daily-life use and also facilitate the embodiment of the assistive system.},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
Background: Active hand prostheses controlled using electromyography (EMG) signals have been used for decades to restore the grasping function, lost after an amputation. Although myocontrol is a simple and intuitive interface, it is also imprecise due to the stochastic nature of the EMG recorded using surface electrodes. Furthermore, the sensory feedback from the prosthesis to the user is still missing. In this study, we present a novel concept to close the loop in myoelectric prostheses. In addition to conveying the grasping force (system output), we provided to the user the online information about the system input (EMG biofeedback). Methods: As a proof-of-concept, the EMG biofeedback was transmitted in the current study using a visual interface (ideal condition). Ten able-bodied subjects and two amputees controlled a state-of-the-art myoelectric prosthesis in routine grasping and force steering tasks using EMG and force feedback (novel approach) and force feedback only (classic approach). The outcome measures were the variability of the generated forces and absolute deviation from the target levels in the routine grasping task, and the root mean square tracking error and the number of sudden drops in the force steering task. Results: During the routine grasping, the novel method when used by able-bodied subjects decreased twofold the force dispersion as well as absolute deviations from the target force levels, and also resulted in a more accurate and stable tracking of the reference force profiles during the force steering. Furthermore, the force variability during routine grasping did not increase for the higher target forces with EMG biofeedback. The trend was similar in the two amputees. Conclusions: The study demonstrated that the subjects, including the two experienced users of a myoelectric prosthesis, were able to exploit the online EMG biofeedback to observe and modulate the myoelectric signals, generating thereby more consistent commands. This allowed them to control the force predictively (routine grasping) and with a finer resolution (force steering). The future step will be to implement this promising and simple approach using an electrotactile interface. A prosthesis with a reliable response, following faithfully user intentions, would improve the utility during daily-life use and also facilitate the embodiment of the assistive system.
Hausmann, J.; Sweeney-Reed, C. M.; Sobieray, U.; Matzke, M.; Heinze, H. -J.; Voges, J.; Buentjen, L.
In: J. NeuroEng. Rehabil., Bd. 12, Nr. 1, 2015, ISSN: 1743-0003.
@article{Hausmann2015,
title = {Functional electrical stimulation through direct 4-channel nerve stimulation to improve gait in multiple sclerosis: a feasibility study},
author = {J. Hausmann and C. M. Sweeney-Reed and U. Sobieray and M. Matzke and H. -J. Heinze and J. Voges and L. Buentjen},
url = {https://www.embase.com/search/results?subaction=viewrecord&id=L606904897&from=export},
doi = {10.1186/s12984-015-0096-3},
issn = {1743-0003},
year = {2015},
date = {2015-01-01},
journal = {J. NeuroEng. Rehabil.},
volume = {12},
number = {1},
address = {J. Hausmann, Department of Neurology, Otto-von-Guericke University, Magdeburg, Leipziger Str. 44, Magdeburg, Germany},
abstract = {Background: Gait dysfunction due to lower limb central paralysis, frequently involving drop foot, is a common cause of disability in multiple sclerosis and has been treated with transcutaneous functional electrical stimulation (FES). We provide here the first report of 4-channel semi-implantable FES of the peroneal nerve which has been successfully used for rehabilitation in patients following stroke. Methods: FES was implemented via a 4-channel semi-implantable closed-loop system (ActiGait®, ©Ottobock), generating dorsiflexion in drop foot. Walking distance, gait symmetry (temporospatial gait analyses, Vicon Motion Systems®), gait velocity (10 m walking test) and quality of life (SF-36 questionnaire) were measured to evaluate the therapeutic benefit of this system in two patients with progressive MS. Results: Walking distance increased from 517 to 1884 m in Patient 1 and from 52 to 506 m in Patient 2. Gait velocity did not change significantly in Patient 1 and increased from 0.6 to 0.8 m/s in Patient 2. Maximum deviations of center of mass from the midline to each side changed significantly after 3 months of stimulation compared to baseline, decreasing from 15 to 12 mm in Patient 1 and from 47 to 37 mm in Patient 2. Both patients experienced reduced pain and fatigue and benefits to quality of life. Adverse events did not occur during the observation period. Conclusion: We conclude that implantable 4-channel FES systems are not only feasible but present a promising new alternative for treating central drop foot in MS patients.},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
Background: Gait dysfunction due to lower limb central paralysis, frequently involving drop foot, is a common cause of disability in multiple sclerosis and has been treated with transcutaneous functional electrical stimulation (FES). We provide here the first report of 4-channel semi-implantable FES of the peroneal nerve which has been successfully used for rehabilitation in patients following stroke. Methods: FES was implemented via a 4-channel semi-implantable closed-loop system (ActiGait®, ©Ottobock), generating dorsiflexion in drop foot. Walking distance, gait symmetry (temporospatial gait analyses, Vicon Motion Systems®), gait velocity (10 m walking test) and quality of life (SF-36 questionnaire) were measured to evaluate the therapeutic benefit of this system in two patients with progressive MS. Results: Walking distance increased from 517 to 1884 m in Patient 1 and from 52 to 506 m in Patient 2. Gait velocity did not change significantly in Patient 1 and increased from 0.6 to 0.8 m/s in Patient 2. Maximum deviations of center of mass from the midline to each side changed significantly after 3 months of stimulation compared to baseline, decreasing from 15 to 12 mm in Patient 1 and from 47 to 37 mm in Patient 2. Both patients experienced reduced pain and fatigue and benefits to quality of life. Adverse events did not occur during the observation period. Conclusion: We conclude that implantable 4-channel FES systems are not only feasible but present a promising new alternative for treating central drop foot in MS patients.
2014
Whitehead, J. M. Aldridge; Wolf, E. J.; Scoville, C. R.; Wilken, J. M.
In: Clin. Orthop. Relat. Res., Bd. 472, Nr. 10, S. 3093–3101, 2014, ISSN: 0009-921X.
@article{AldridgeWhitehead2014,
title = {Does a Microprocessor-controlled Prosthetic Knee Affect Stair Ascent Strategies in Persons With Transfemoral Amputation?},
author = {J. M. Aldridge Whitehead and E. J. Wolf and C. R. Scoville and J. M. Wilken},
url = {https://www.embase.com/search/results?subaction=viewrecord&id=L608263443&from=export},
doi = {10.1007/s11999-014-3484-2},
issn = {0009-921X},
year = {2014},
date = {2014-10-01},
journal = {Clin. Orthop. Relat. Res.},
volume = {472},
number = {10},
pages = {3093–3101},
publisher = {Ovid Technologies (Wolters Kluwer Health)},
address = {J.M. Wilken, DOD-VA Extremity Trauma and Amputation Center of Excellence, Center for the Intrepid, Department of Orthopaedics and Rehabilitation, Brooke Army Medical Center, 3551 Roger Brooke Drive, Ft Sam Houston, TX, United States},
abstract = {Background: Stair ascent can be difficult for individuals with transfemoral amputation because of the loss of knee function. Most individuals with transfemoral amputation use either a step-to-step (nonreciprocal, advancing one stair at a time) or skip-step strategy (nonreciprocal, advancing two stairs at a time), rather than a step-over-step (reciprocal) strategy, because step-to-step and skip-step allow the leading intact limb to do the majority of work. A new microprocessor-controlled knee (Ottobock X2®) uses flexion/extension resistance to allow step-over-step stair ascent. Questions/Purposes: We compared self-selected stair ascent strategies between conventional and X2® prosthetic knees, examined between-limb differences, and differentiated stair ascent mechanics between X2® users and individuals without amputation. We also determined which factors are associated with differences in knee position during initial contact and swing within X2® users. Methods: Fourteen individuals with transfemoral amputation participated in stair ascent sessions while using conventional and X2® knees. Ten individuals without amputation also completed a stair ascent session. Lower-extremity stair ascent joint angles, moment, and powers and ground reaction forces were calculated using inverse dynamics during self-selected strategy and cadence and controlled cadence using a step-over-step strategy. Results: One individual with amputation self-selected a step-over-step strategy while using a conventional knee, while 10 individuals self-selected a step-over-step strategy while using X2® knees. Individuals with amputation used greater prosthetic knee flexion during initial contact (32.5°},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
Background: Stair ascent can be difficult for individuals with transfemoral amputation because of the loss of knee function. Most individuals with transfemoral amputation use either a step-to-step (nonreciprocal, advancing one stair at a time) or skip-step strategy (nonreciprocal, advancing two stairs at a time), rather than a step-over-step (reciprocal) strategy, because step-to-step and skip-step allow the leading intact limb to do the majority of work. A new microprocessor-controlled knee (Ottobock X2®) uses flexion/extension resistance to allow step-over-step stair ascent. Questions/Purposes: We compared self-selected stair ascent strategies between conventional and X2® prosthetic knees, examined between-limb differences, and differentiated stair ascent mechanics between X2® users and individuals without amputation. We also determined which factors are associated with differences in knee position during initial contact and swing within X2® users. Methods: Fourteen individuals with transfemoral amputation participated in stair ascent sessions while using conventional and X2® knees. Ten individuals without amputation also completed a stair ascent session. Lower-extremity stair ascent joint angles, moment, and powers and ground reaction forces were calculated using inverse dynamics during self-selected strategy and cadence and controlled cadence using a step-over-step strategy. Results: One individual with amputation self-selected a step-over-step strategy while using a conventional knee, while 10 individuals self-selected a step-over-step strategy while using X2® knees. Individuals with amputation used greater prosthetic knee flexion during initial contact (32.5°
Kistenberg, R. S.
Prosthetic choices for people with leg and arm amputations Artikel
In: Phys. Med. Rehabil. Clin. North Am., Bd. 25, Nr. 1, S. 93–115, 2014, ISSN: 1558-1381.
@article{Kistenberg2014,
title = {Prosthetic choices for people with leg and arm amputations},
author = {R. S. Kistenberg},
url = {https://www.embase.com/search/results?subaction=viewrecord&id=L370343297&from=export},
doi = {10.1016/j.pmr.2013.10.001},
issn = {1558-1381},
year = {2014},
date = {2014-01-01},
journal = {Phys. Med. Rehabil. Clin. North Am.},
volume = {25},
number = {1},
pages = {93–115},
address = {R.S. Kistenberg, Georgia Institute of Technology, School of Applied Physiology, 555 14th Street, Atlanta, GA 30318, United States},
abstract = {New technology and materials have advanced prosthetic designs to enable people who rely on artificial limbs to achieve feats never dreamed before. However, the latest and the greatest technology is not appropriate for everyone. The aim of this article is to present contemporary options that are available for people who rely on artificial limbs to enhance their quality of life for mobility and independence. © 2014 Elsevier Inc.},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
New technology and materials have advanced prosthetic designs to enable people who rely on artificial limbs to achieve feats never dreamed before. However, the latest and the greatest technology is not appropriate for everyone. The aim of this article is to present contemporary options that are available for people who rely on artificial limbs to enhance their quality of life for mobility and independence. © 2014 Elsevier Inc.
Chitragari, G.; Mahler, D. B.; Sumpio, B. J.; Blume, P. A.; Sumpio, B. E.
Prosthetic options available for the diabetic lower limb amputee Artikel
In: Clin. Podiatr. Med. Surg., Bd. 31, Nr. 1, S. 174–185, 2014, ISSN: 1558-2302.
@article{Chitragari2014,
title = {Prosthetic options available for the diabetic lower limb amputee},
author = {G. Chitragari and D. B. Mahler and B. J. Sumpio and P. A. Blume and B. E. Sumpio},
url = {https://www.embase.com/search/results?subaction=viewrecord&id=L370343216&from=export},
doi = {10.1016/j.cpm.2013.09.008},
issn = {1558-2302},
year = {2014},
date = {2014-01-01},
journal = {Clin. Podiatr. Med. Surg.},
volume = {31},
number = {1},
pages = {174–185},
address = {B.E. Sumpio, Yale University School of Medicine, 333 Cedar Street, BB 204, New Haven, CT 06520-8062, United States},
abstract = {Although the rate of lower limb amputation in patients with diabetes is decreasing, amputation still remains a major complication of diabetes. Prosthetics have been long used to help amputees ambulate. The last decade has seen many advances in prostheses with the enhanced understanding of the mechanics of ambulation and improved use of technology. This review describes the different types of prosthetic options available for below knee, ankle, and foot amputees, emphasizing the latest advances in prosthetic design. © 2014 Elsevier Inc.},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
Although the rate of lower limb amputation in patients with diabetes is decreasing, amputation still remains a major complication of diabetes. Prosthetics have been long used to help amputees ambulate. The last decade has seen many advances in prostheses with the enhanced understanding of the mechanics of ambulation and improved use of technology. This review describes the different types of prosthetic options available for below knee, ankle, and foot amputees, emphasizing the latest advances in prosthetic design. © 2014 Elsevier Inc.
2013
Komolafe, O.; Wood, S.; Caldwell, R.; Hansen, A.; Fatone, S.
Methods for characterization of mechanical and electrical prosthetic vacuum pumps Artikel
In: J. Rehabil. Res. Dev., Bd. 50, Nr. 8, S. 1069–1078, 2013, ISSN: 1938-1352.
@article{Komolafe2013,
title = {Methods for characterization of mechanical and electrical prosthetic vacuum pumps},
author = {O. Komolafe and S. Wood and R. Caldwell and A. Hansen and S. Fatone},
url = {https://www.embase.com/search/results?subaction=viewrecord&id=L370540897&from=export},
doi = {10.1682/jrrd.2012.11.0204},
issn = {1938-1352},
year = {2013},
date = {2013-01-01},
journal = {J. Rehabil. Res. Dev.},
volume = {50},
number = {8},
pages = {1069–1078},
address = {S. Fatone, Northwestern University, Prosthetics-Orthotics Center, 680 N Lake Shore Dr, Suite 1100, Chicago, IL 60611, United States},
abstract = {Despite increasingly widespread adoption of vacuum- assisted suspension systems in prosthetic clinical practices, there remain gaps in the body of scientific knowledge guiding clinicians' choices of existing products. In this study, we identified important pump-performance metrics and developed techniques to objectively characterize the evacuation performance of prosthetic vacuum pumps. The sensitivity of the proposed techniques was assessed by characterizing the evacuation performance of two electrical (Harmony e-Pulse [Ottobock; Duderstadt, Germany] and LimbLogic VS [Ohio Willow Wood; Mt. Sterling, Ohio]) and three mechanical (Harmony P2, Harmony HD, and Harmony P3 [Ottobock]) prosthetic pumps in bench-top testing. Five fixed volume chambers ranging from 33 cm3 (2 in.3) to 197 cm3 (12 in.3) were used to represent different air volume spaces between a prosthetic socket and a liner-clad residual limb. All measurements were obtained at a vacuum gauge pressure of 57.6 kPa (17 inHg). The proposed techniques demonstrated sensitivity to the different electrical and mechanical pumps and, to a lesser degree, to the different setting adjustments of each pump. The sensitivity was less pronounced for the mechanical pumps, and future improvements for testing of mechanical vacuum pumps were proposed. Overall, this study successfully offers techniques feasible as standards for assessing the evacuation performance of prosthetic vacuum pump devices.},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
Despite increasingly widespread adoption of vacuum- assisted suspension systems in prosthetic clinical practices, there remain gaps in the body of scientific knowledge guiding clinicians' choices of existing products. In this study, we identified important pump-performance metrics and developed techniques to objectively characterize the evacuation performance of prosthetic vacuum pumps. The sensitivity of the proposed techniques was assessed by characterizing the evacuation performance of two electrical (Harmony e-Pulse [Ottobock; Duderstadt, Germany] and LimbLogic VS [Ohio Willow Wood; Mt. Sterling, Ohio]) and three mechanical (Harmony P2, Harmony HD, and Harmony P3 [Ottobock]) prosthetic pumps in bench-top testing. Five fixed volume chambers ranging from 33 cm3 (2 in.3) to 197 cm3 (12 in.3) were used to represent different air volume spaces between a prosthetic socket and a liner-clad residual limb. All measurements were obtained at a vacuum gauge pressure of 57.6 kPa (17 inHg). The proposed techniques demonstrated sensitivity to the different electrical and mechanical pumps and, to a lesser degree, to the different setting adjustments of each pump. The sensitivity was less pronounced for the mechanical pumps, and future improvements for testing of mechanical vacuum pumps were proposed. Overall, this study successfully offers techniques feasible as standards for assessing the evacuation performance of prosthetic vacuum pump devices.
Fligge, N.; Urbanek, H.; der Smagt, P. Van
Relation between object properties and EMG during reaching to grasp Artikel
In: J. Electromyogr. Kinesiology, Bd. 23, Nr. 2, S. 402–410, 2013, ISSN: 1873-5711.
@article{Fligge2013,
title = {Relation between object properties and EMG during reaching to grasp},
author = {N. Fligge and H. Urbanek and P. Van der Smagt},
url = {https://www.embase.com/search/results?subaction=viewrecord&id=L52331059&from=export},
doi = {10.1016/j.jelekin.2012.10.010},
issn = {1873-5711},
year = {2013},
date = {2013-01-01},
journal = {J. Electromyogr. Kinesiology},
volume = {23},
number = {2},
pages = {402–410},
address = {N. Fligge, German Aerospace Center (DLR), Center for Robotics and Mechatronics, Muenchner Strasse 20, D-82234 Oberpfaffenhofen-Wessling, Germany},
abstract = {In order to stably grasp an object with an artificial hand, a priori knowledge of the object's properties is a major advantage, especially to ensure subsequent manipulation of the object held by the hand. This is also true for hand prostheses: pre-shaping of the hand while approaching the object, similar to able-bodied, allows the wearer for a much faster and more intuitive way of handling and grasping an object. For hand prostheses, it would be advantageous to obtain this information about object properties from a surface electromyography (sEMG) signal, which is already present and used to control the active prosthetic hand.We describe experiments in which human subjects grasp different objects at different positions while their muscular activity is recorded through eight sEMG electrodes placed on the forearm. Results show that sEMG data, gathered before the hand is in contact with the object, can be used to obtain relevant information on object properties such as size and weight. © 2012 Elsevier Ltd.},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
In order to stably grasp an object with an artificial hand, a priori knowledge of the object's properties is a major advantage, especially to ensure subsequent manipulation of the object held by the hand. This is also true for hand prostheses: pre-shaping of the hand while approaching the object, similar to able-bodied, allows the wearer for a much faster and more intuitive way of handling and grasping an object. For hand prostheses, it would be advantageous to obtain this information about object properties from a surface electromyography (sEMG) signal, which is already present and used to control the active prosthetic hand.We describe experiments in which human subjects grasp different objects at different positions while their muscular activity is recorded through eight sEMG electrodes placed on the forearm. Results show that sEMG data, gathered before the hand is in contact with the object, can be used to obtain relevant information on object properties such as size and weight. © 2012 Elsevier Ltd.
2012
Portnoy, S.; Kristal, A.; Gefen, A.; Siev-Ner, I.
In: Gait Posture, Bd. 35, Nr. 1, S. 121–125, 2012, ISSN: 1879-2219.
@article{Portnoy2012,
title = {Outdoor dynamic subject-specific evaluation of internal stresses in the residual limb: Hydraulic energy-stored prosthetic foot compared to conventional energy-stored prosthetic feet},
author = {S. Portnoy and A. Kristal and A. Gefen and I. Siev-Ner},
url = {https://www.embase.com/search/results?subaction=viewrecord&id=L51635905&from=export},
doi = {10.1016/j.gaitpost.2011.08.021},
issn = {1879-2219},
year = {2012},
date = {2012-01-01},
journal = {Gait Posture},
volume = {35},
number = {1},
pages = {121–125},
address = {S. Portnoy, Department of Biomedical Engineering, Faculty of Engineering, Tel Aviv University, Tel Aviv, Israel},
abstract = {The prosthetic foot plays an important role in propelling, breaking, balancing and supporting body loads while the amputee ambulates on different grounds. It is therefore important to quantify the effect of the prosthetic foot mechanism on biomechanical parameters, in order to prevent pressure ulcers and deep tissue injury. Our aim was to monitor the internal stresses in the residuum of transtibial amputation (TTA) prosthetic-users ambulating on different terrains, which the amputees encounter during their daily activities, i.e. paved floor, grass, ascending and descending stairs and slope. We specifically aimed to compare between the internal stresses in the TTA residuum of amputees ambulating with a novel hydraulic prosthetic foot compared to conventional energy storage and return (ESR) prosthetic feet. Monitoring of internal stresses was accomplished using a portable subject-specific real-time internal stress monitor. We found significant decrease (p<. 0.01) in peak internal stresses and in the loading rate of the amputated limb, while walking with the hydraulic foot, compared to walking with ESR feet. The loading rate calculated while ambulating with the hydraulic foot was at least three times lower than the loading rate calculated while ambulating with the ESR foot. Although the average decrease in internal stresses was ∼2-fold larger when replacing single-toe ESR feet with the hydraulic foot than when replacing split-toed ESR feet with the hydraulic foot, the differences were statistically insignificant. Our findings suggest that using a hydraulic prosthetic foot may protect the distal tibial end of the TTA residuum from high stresses, therefore preventing pressure-related injury and pain. © 2011 Elsevier B.V.},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
The prosthetic foot plays an important role in propelling, breaking, balancing and supporting body loads while the amputee ambulates on different grounds. It is therefore important to quantify the effect of the prosthetic foot mechanism on biomechanical parameters, in order to prevent pressure ulcers and deep tissue injury. Our aim was to monitor the internal stresses in the residuum of transtibial amputation (TTA) prosthetic-users ambulating on different terrains, which the amputees encounter during their daily activities, i.e. paved floor, grass, ascending and descending stairs and slope. We specifically aimed to compare between the internal stresses in the TTA residuum of amputees ambulating with a novel hydraulic prosthetic foot compared to conventional energy storage and return (ESR) prosthetic feet. Monitoring of internal stresses was accomplished using a portable subject-specific real-time internal stress monitor. We found significant decrease (p<. 0.01) in peak internal stresses and in the loading rate of the amputated limb, while walking with the hydraulic foot, compared to walking with ESR feet. The loading rate calculated while ambulating with the hydraulic foot was at least three times lower than the loading rate calculated while ambulating with the ESR foot. Although the average decrease in internal stresses was ∼2-fold larger when replacing single-toe ESR feet with the hydraulic foot than when replacing split-toed ESR feet with the hydraulic foot, the differences were statistically insignificant. Our findings suggest that using a hydraulic prosthetic foot may protect the distal tibial end of the TTA residuum from high stresses, therefore preventing pressure-related injury and pain. © 2011 Elsevier B.V.